Configure Zebra TC27 for ParagonWMS

To enable ParagonWMS the scanning devices needs to be configured to always perform an Enter after a scan. 

For a Zebra TC27 it implies that the settings Action key character and Send ENTER key need to be configured as shown in image below. The following steps need to be performed on a Zebra TC27:

1. Open DataWedge
2. Select Profile0
3. Scroll to Action key character. This field should be set to Carriage return. 
   1. Click on Action key character to change the setting.
4. Scroll to Basic data formatting.
5. Open Basic data formatting. 
6. Scroll to Send ENTER key. The Send ENTER key needs to be switched on.
   1. Switch on.
7. Scroll to Key Event Options
   1. Select Send Characters as Events to turn it on. Set it to send ASCII code 32 to 126 as key events.
   2. Select Key Event Delay and set it to 5 ms - hit OK to save
8. Exit DataWedge

The configuration is shown in the following video: